Description

SATA Dry Jet 2 Blow Gun (217489)

With the SATA dry jet 2 dry blow gun, you can significantly shorten the flash-off and thus the cabin occupancy times. It uses the so-called Venturi principle. In addition to the supplied compressed air, a multiple of ambient air is sucked in. The uniform, wide air flow generated in the injector zone of the wide spray nozzle also contributes to a reduction in flash-off time. Thus, the SATA dry jet 2 achieves an approx. 15 % higher drying performance compared to commercially available models.

quick drying of waterborne paint by utilizing the Venturi principle – in addition to the compressed air feeding the system, a multiple of ambient air is drawn in, turning, for example, 270 Nl/min of compressed air into approx. 2,700 Nl/min that immediately serve for drying.

To ensure a fast drying process following waterborne paint, it is vital to apply as much air as possible within a short period of time onto the painted object. To achieve this, the SATA dry jet 2 also relies on the Venturi principle like its predecessor: In addition to the compressed air feeding the system, a multiple of ambient air is drawn in that serves directly to accelerate the drying process.

The design of the flat fan nozzle gives the dry jet 2 an extra large air footprint, further increasing the drying efficiency, helping reduce the flash-off time and enhancing the quality of the drying process simultaneously.

• The recommended Inlet Pressure is 29 to 35 psi and uses CFM 8.2 to 9.35 CFM
• The Venturi principle design the CFM is magnified x10 to give a 92.35 CFM output

– Due to the integrated air regulation, the painter can precisely adjust the air supply to adapt the airflow volume to ideally suit the requirements of the painted object

• A painter can dry entire side of a car with one SATA dry jet 2

An integrated 125μ sieve serves to filter contamination from the aspirated air. The SATA dry jet 2 uses the same 125μ filter as the SATA RPS cup lids, the filters are also available separately in a 10 pack (part no. 222125)

Product Benefits

• Shorter drying times with water-based paint systems
• Low investment costs
• Practical product versions
• Integrated air regulation
• Disposable sieve from the RPS multi-purpose cup system
• Ergonomic handle
• Easy handling
• Long lifetime and low-maintenance

Technical Specifications

• Air consumption: 270 Nl/min
• Max. air inlet pressure: 2,5 bar
• Max. operating pressure: 10,0 bar
• Recommended dynamic inlet air pressure (compliant / HVLP): 2,5 bar
• Art. No.: 217489
• Product advantages: Shorter drying times with water-based paint systems