Description
DeVilbiss SLG-610 “Starting Line” Spraygun (1.3mm) *CONVENTIONAL SOLVENT GUN*
Our opinion: Great starting point – if you need a primer gun to partner – see Quartz guns
* Suitable for small compressors *
This new model is a budget priced Spraygun with conventional atomisation targeted at small jobbing car refinish painters where low output portable compressors are frequently in use.
- Suitable for most automotive refinish general single layer materials
- Lightweight but strong, plated, cast aluminium Spraygun body construction
- Comfortable ergonomic handle
- Smooth trigger action for ease of operator control when feathering or bleeding
- Easy-to-adjust air inlet pressure, spray pattern shape (full fan to round) and fluid controls
- The air cap only consumes 136 L/min (4.8 cfm) so a small portable 1hp / 5 cfm air compressor is sufficient to operate the Spraygun
- SLG-610 Sprayguns are supplied as ready to use “Refinisher Kits”, complete with a 550ml cup, filter, cleaning brush & universal spanner
Technical Specifications
- Air inlet connection thread: 1/4″
- Recommended working pressure: 2.5 bar (35psi)
- Max inlet pressure: 4 bar
- Setup: 1.3mm
– For 3M PPS adapter select No.27 (16119) from the model part number dropdown. Please follow the links below for selected adaptor.
3M PPS Preparation System Adaptor (Choice of 25 Adaptors) (16032 / 16759)
– SATA (150136)
– Colad No.22 (9370A22)
Colad Snap Lid Adaptor (choose in drop down. refer to ‘tech’ for right one) (9370A02 / 9370A22)
