Description

SATAjet 3000 K Spraymix spray gun with paint tube, strainer 100msh, without paint nozzle

Optimized high pressure gun for maximum quality and fast material application.

Ideal for spraying large quantities of high viscosity material for high quality surface finishes. Special emphasis is put on what the item is used for such as truck frames, locomotives, containers and ships.

• Adjustment possibilities make it comparable to a classic air-atomizing paint spray gun. The spray fan width may be adapted perfectly to the object.
• Manual paint spray gun for air-assisted Airless units, for highest requirements and longest possible life time.
• Large surface covering capacity, while emitting low overspray and helping to protect the environment.
• Fully suitable for waterborne materials.
• Large nozzle range for ideal adaptation to material and object.
• Infinitely variable round / flat spray control without pressure fluctuations.
• Paint needle tip and seat made of carbide.

Specifications

• Air consumption: 3 Nl/min (0.1 cfm)
• Recommended inlet pressure: 4.0 bar (58 psi)
• Maximum operating temperature: 50
• Maximum operating overpressure: 10 bar (145 psi)
• Weight: 650g
• Air inlet: G 1/4 ext.
• Size: 0.23 mm – 0.60 mm

For Adapters please follow the links below for selected adaptor and select the correct part number from the model part number dropdown.

– 3M PPS adapter Series 1.0 No.40 (16135)

3M PPS Preparation System Adaptor (Choice of 25 Adaptors) (16032 / 16759)

– 3M PPS adapter Series 2.0 No. S40A (26135)

3M PPS Preparation System Adaptor Series 2.0 (26003 / 26139)

– DeVilbiss (DPC-10)

DeVilbiss DeKup System Adaptor (Choice of 8 Adaptors)

– Colad (9370A04)

Colad Snap Lid Adaptor (choose in drop down. refer to ‘tech’ for right one) (9370A02 / 9370A22)

Additional information